To check for a leak apply soapy water to the end of the hose coming off of the outlet of the regulator.
Turning the adjustment out too far can cause the regulator to allow fuel to flow through it even with the engine off. Turning the adjustment counterclockwise will cause the regulator to take less negative pressure (“vacuum”) to open the regulator. Take the first screw all the way out, it is just a dust cover. Note: If all else fails there is an adjustment just above the inlet of the regulator called the Lock-off Adjustment (or zero governor adjustment). Please do not be afraid of tweaking this adjustment to find the “sweet spot” where the engine performs the best. Some engines may take more turns or less turns but 5-7 is a base starting point.
#Clark forklift propane tanks full
Typically for Propane it will be 5-7 full turns out. Having the correct amount of pressure is as important as having a system that does not cut down on the needed volume of fuel.Ĥ.) The load-block adjustment is critical!!! It has to be tested 1 turn at a time in each direction. * Note pressure and volume are not the same. Shutoff valves with red or yellow colored handles usually have a small bore that restricts fuel flow. “There is no such thing as a bell increaser, only bell reducers.” Also if installing a shutoff valve please make sure it is a full bore valve. This will save you time in the long run! A major issue we see is pipe size consistency once the pipe size is reduced it cannot be increased. Please take the time to properly understand what is required. This will ensure a sufficient volume of propane for the engine to run properly. 10 hp = 100,000 BTU's)ģ.) Check that the pipe sizing is correct for your application. (10,000 Btu's per hour per horsepower (ex. Will have air trapped inside of them causing the fuel mixture in the carburetor to be too lean.Ģ.) If you are not using a tank regulator from USCarburetion make sure the regulator is low pressure (0.5 psi) if you have a low pressure kit and that it has a sufficient BTU rating. (at least 4 times.) Tanks that have not been filled multiple times
1.) The first and most important step is to make sure that you are using a propane tank that has been refilled multiple times.
0 kommentar(er)
